Deora Enterprises LLP

Usage/Application	Film Grade
Color	White
Packaging Type	FFS Bag
Packaging Size	25 kg
Melt Flow Index	1.0
Brand	HMEL
Physical State	Solid
Density	0.920
Country of Origin	Made in India

Minimum order quantity: 5000 Kg

F0120L Polysure LLDPE Blown Film

Product Characteristics:

Polysure F0120L is a 1-butene comonomer based Linear Low Density Polyethylene, produced by Gas Phase – UNIPOLTM PE technology and primarily suitable for Blown Film Process. This grade contains Slip & Anti-block additives. Film produced with F0120L offers excellent optical, superior mechanical, tear resistance & good heat seal properties.

Recommended Applications:

General purpose packaging, Multilayer films, Liners, Agricultural film, Bag in Box, Food Packaging, Form Fill and Seal Packaging, Freezer film, Garment film, Heavy Duty Bags.

Usage/Application	Plastic Industry
Color	White
Packaging Type	FFS bag
Packaging Size	25 kg
Melt Flow Index	1.0
Brand	Sabic
Storage Instructions	Store in cool and dry place
Physical State	Solid

Minimum order quantity: 5000 Kg

SABIC® LLDPE 118WJ is a butene linear low density polyethylene resin typically used for general purpose applications. Films produced from this resin are tough with good puncture resistance, high tensile strength and good hottack properties. The resin contains slip and antiblock additive. SABIC® LLDPE 118WJ is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

Usage/Application	Plastic Industry
Color	White
Packaging Type	sack
Packaging Size	25 kg
Melt Flow Index	1.0
Physical State	solid granules

Minimum order quantity: 5000 Kg

Film Grade LLDPE JF19010 virgin polymer
MFI - 1.0
Manufactured by - Reliance 
Application - Raw material for manufacturing polybags, polysheets, rolls, films.
Slip grade
prime grade
MOQ - 1MT
Available

Usage/Application	Plastic Industry
Color	Natural
Packaging Type	sack
Packaging Size	25 kg
Melt Flow Index	1.0
Brand	Opalene
Storage Instructions	Store In Dry Place
Features	Recyclable

Minimum order quantity: 5000 Kg

Caution:

• Store In Cover
• No Hooks
• For Industrial Use Only

Usage/Application	Plastic Industry
Color	White
Packaging Type	Gunny Bag
Packaging Size	25kg
Melt Flow Index	1
Brand	G-Lene
Storage Instructions	Store In Dry Place
Manufacturing Company	Gail India Limited
Country of Origin	Made in India

Minimum order quantity: 5000 Kg

F18S010U

Linear Low Density Polyethylene Film

F18S010U is a Linear low density polyethylene (LLDPE) resin for blown film extrusion offering excellent processability with optimum balance of mechanical and optical properties. It has adequate level of slip and anti-blocking agent for good openability and slip characteristics of the film. It offers excellent drawdown capability for thinner gauge films. Its low gel count, resistance to leakage & pinholes, excellent sealing characteristics make it preferred choice for consumers in Industrial/ consumer packaging for various applications.

It is recommended for general purpose, heavy duty and liquid packaging in laminated/ non-laminated blown film applications.

Property

Melt Flow Index (I2)
Density
Tensile Strength @Break (MD/TD) Elongation @Break (MD/TD)
Tear Strength (MD/TD)
Dart Impact Strength

Values* Unit

1.0 g/10min 0.918 g/cc 400/270 kg/cm2 580/750 %

6/15 g/ mic 3.0 g/mic

Test Method

ASTM D1238 ASTM D1505 ASTM D882 ASTM D882 ASTM D1922 ASTM D1709

Usage/Application	Plastic Industry
Color	White
Packaging Type	25 kg sack
Packaging Size	25 kg
Melt Flow Index	1.0
Brand	Gail
Storage Instructions	Store in cool and dry place
Country of Origin	Made in India

Minimum order quantity: 1000 Kg

Gail D22S010A prime grade material is recommended for drip irrigation extruded products.
Its a virgin polymer manufactured by Gail India.
We can provide this material in bulk quantity at best rate.

Usage/Application	Plastic Industry
Color	White
Packaging Type	25 kg sack
Packaging Size	25 kg
Melt Flow Index	2.0 mfi
Brand	Opalene
Storage Instructions	Store in cool place
Physical State	solid
Country of Origin	Made in India

Minimum order quantity: 5000 Kg

LLDPE F2002A is a butene co-monomer based natural colored grade produced with the latest Ineos Gas Phase polymerization Technology exhibiting following features:
 Good Mechanical Properties
 Low gels 
Easy Processing
 No Slip & Anti-block additives

LLDPE F2002A is recommended for following applications:
 Lamination films
 Stretch cling films
 Air bubble films
 Drip Laterals 

Usage/Application	Plastic Industry
Color	White
Packaging Type	bag
Packaging Size	25 kg
Melt Flow Index	1.0
Physical State	solid

Minimum order quantity: 5000 Kg

EFDC-7087 is a linear low-density polyethylene (LLDPE) resin for tubular blown film extrusion. Films made from EFDA-7087 have good toughness, high tensile strength and outstanding puncture resistance. EFDA-7087 contains high levels of slip and antiblocking agent. The product offers excellent draw down capability for thinner gauge film production. The films have good sealability and machinability for easy conversion on high-speed machines.

APPLICATIONS

EFDC-7087 is recommended for the manufacture of thin gauge liner films, garment bags and other industrial and consumer packaging applications requiring toughness and puncture resistance.

TYPICAL PROPERTIES

Properties
Resin Properties
Melt Index, I2.16
Density
Melting Point
Bulk Density
Blown Film Properties* Gauge
Tensile Strength

Elmendorf Tear

Dart Impact, F50

Puncture Energy

Haze

Gloss, 45°

Units

g/10 min

g/cm3 °C Kg/m3

Microns MD MPa

TD
MPa

MD N/mm TD

g J/mm %
-

Test Method

ASTM D 1238 ASTM D 1505 EQUA TE ASTM D 1895

ASTM D 882

ASTM D 882

ASTM D 1922

ASTM D 1709 EQUA TE ASTM D 1003 ASTM D 2457

Typical Value

1.0 0.918 124 530

25 34 26 193 221 35 135

A 100 75

17 50

Usage/Application	Stretch Film
Color	White
Packaging Type	bag
Packaging Size	25 kg
Melt Flow Index	2.0
Brand	Basell
Storage Instructions	Store in cool and dry place
Physical State	Solid
Country of Origin	Made in India

Minimum order quantity: 5000 Kg

Petrothene GA1820

Linear Low Density Polyethylene

Product Description

The Petrothene GA1820 resin is a pelletized linear low density polyethylene selected by customers for applications that require maximum strength and toughness. This product offers excellent additive homogeneity, requires no transfer equipment modification, and facilitates clean and safe handling. Typical applications include cast stretch film, blown stretch film, and high end film applications. The GA1820 resin offers enhanced film strength, unitization holding force, drawdown, toughness, and heat seal strength.

Typical Properties

Physical

Melt Flow Rate, (190 °C/2.16 kg) Base Resin Density, (23 °C) Product Density, (23 °C)

Film

Cast Film Dart Drop Impact Strength, F50 Blown Film Dart Drop Impact Strength, F50 Cast Film Tensile Strength at Break

Commercial: Active
Asia-Pacific; Europe; North America; South & Central America

Blown Stretch Film; Cast Stretch Film; General Purpose Film Packaging; High End Film Applications

Flexible Packaging; Rigid Packaging
Blown Film; Cast Film; Sheet and Profile Extrusion

Nominal Value

2.0 0.918 0.918

90 130

English Nominal Units Value

g/10 min 2.0 g/cm3 0.918 g/cm3 0.918

SI Units

g/10 min g/cm3 g/cm3

Test Method

ASTM D1238 ASTM D792 ASTM D792

ASTM D1709 ASTM D1709

ASTM D882 ASTM D882

ASTM D882 ASTM D882

ASTM D882 ASTM D882

ASTM D882 ASTM D882

ASTM D882 ASTM D882

ASTM D882 ASTM D882

Petrothene GA1820 Recipient Tracking #:

Request #: 4753544

g90

g 130 g

35 MPa 22 MPa

56 MPa 45 MPa

380 % 720 %

750 % 900 %

156 MPa 183 MPa

240 MPa 290 MPa

MD 5080

TD 3190 Blown Film Tensile Strength at Break

MD 8130

TD 6530 Cast Film Tensile Elongation at Break

MD 380

TD 720 Blown Film Tensile Elongation at Break

MD 750

TD 900 Cast Film 1% Secant Modulus

MD 22600

TD 26600 Blown Film 1% Secant Modulus

MD 34800 TD 42100

g

psi psi

psi psi

% %

% %

psi psi

psi psi

Usage/Application	Blown film
Color	White
Packaging Type	bag
Packaging Size	25 kg
Melt Flow Index	1.0
Brand	Dow
Physical State	Solid

Minimum order quantity: 5000 Kg

DOWTM LLDPE DFDA-7047 NT 7 Linear Low Density Polyethylene Resin

Overview

DOWTM DFDA-7047 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications.

Main Characteristics:
• Butene linear low density polyethylene • Blown film extrusion
• Pellet form

Complies with:
• EU, No 10/2011
• U.S. FDA, 21 CFR 177.1520(c)3.2a
• Canadian HPFB No Objection (with Limitations)
• JHOSPA (Japan Hygienic Olefin and Styrene Plastics Association)

Consult the regulations for complete details.

Additive Physical

• Antiblock: No

• Slip: No • Processing Aid: No

Density
Base Density 1
Melt Index (190°C/2.16 kg)

Films

Film Thickness - Tested Film Puncture Energy Film Puncture Force
Film Puncture Resistance Film Toughness

MD

TD
Secant Modulus

1% Secant, MD 2% Secant, MD 1% Secant, TD 2% Secant, TD

Tensile Strength MD : Yield TD : Yield MD : Break TD : Break

Tensile Elongation MD:Break TD:Break

Dart Drop Impact Elmendorf Tear Strength 2

MD

TD

Thermal

Vicat Softening Temperature Melting Temperature (DSC)

Nominal Value (English) Nominal Value

0.918 g/cm3 0.918 0.918 g/cm3 0.918 1.0 g/10 min 1.0 Nominal Value (English) Nominal Value 1 mil 25

(SI)

g/cm3 g/cm3 g/10 min (SI)

μm
J
N J/cm3

J/cm3 J/cm3

MPa MPa MPa MPa

MPa MPa MPa MPa

% % g

g
g (SI) °C °C

Test Method

ASTM D792 Dow Method ASTM D1238 Test Method

Dow Method Dow Method Dow Method ASTM D882

ASTM D882

ASTM D882

ASTM D882

ASTM D1709A ASTM D1922

Test Method

ASTM D1525 ISO 3146

Form No. 400-00071350en Rev: 2019-02-08

2.49 35.6 12.0

96.8 95.1

221 189 248 210

10.7 11.0 36.5 26.9

580

690 90 g90

22.0 in·lb 8.00 lbf

145 ft·lb/in3

1170 ft·lb/in3 1150 ft·lb/in3

32000 psi 27400 psi 36000 psi 30400 psi

1550 psi 1600 psi 5300 psi 3900 psi

170 g

320 g

Nominal Value (English)

580 % 690 %

170

320

Nominal Value

216 °F 102 250 °F 121

Page: 1 of 3 ® TM Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow.

Optical Nominal Value

Gloss (45°) 33 Haze 19.0

Extrusion Notes

Fabrication Conditions For Blown Film: • Screw Size: 3.5in.; 30:1ratio L/D
• Screw Type: DSB II
• Die Gap: 70 mil (1.8 mm)

• Melt Temperature: 420°F
• Output: 12 lb/hr/in. of die circumference • Die Diameter: 8 in.
• Blow-Up Ratio: 2.5 to 1
• Screw Speed: 39 rpm
• Frost Line Height: 51 in.

Notes

(English)

Nominal Value (SI) Test Method

33 ASTM D2457 19.0 % ASTM D1003

%

These are typical properties only and are not to be construed as specifications. Users should confirm results by their own tests.

1 Base density is estimated using the assumption that every 1000 ppm of antiblock in the finished product raises the density of the polymer by 0.0006 g/cm3. Base density is the estimated density of the polymer if it did not contain any antiblock.

2 Method B

Usage/Application	Film
Color	White
Packaging Type	bag
Packaging Size	25 kg
Melt Flow Index	0.25
Brand	Borouge
Physical State	Solid

Minimum order quantity: 5000 Kg

POLYETHYLENE

Borstar® FB2230

ENHANCED POLYETHYLENE FOR HIGH PERFORMANCE FLEXIBLE PACKAGING

DESCRIPTION

Borstar®FB2230 is produced using the proprietary Borstar® bimodal technology resulting in easy extrusion with superior mechanical properties. Film made from the product exhibits excellent mechanical strength at normal as well as low temperature, good sealing properties and superior ESCR.
Borstar®FB2230 contains antioxidant.

APPLICATIONS

Mono layer & co-extrusion films Lamination (incl. Stand up Pouches) Compression Packaging
Heavy duty shipping sacks Industrial Film

Form Fill Seal (FFS) Packaging

KEY FEATURES

Easy process ability
Excellent impact strength – stiffness balance Good seal properties
Bubble stability

PHYSICAL PROPERTIES

Property

Density
Melt Flow Rate (190°C/2.16kg) Melt Flow Rate (190°C/5.0kg) Melt Flow Rate (190°C/21.6kg) Melting Temperature
Vicat Softening Point A50 (10 N) ESCR – 10% Igepal – F 50%

Agriculture Film (incl. Greenhouse Film) Shrink film
Geomembrane
Exclusive Carrier/Boutique bags

* Typical properties and data should not be used for specification work

Frozen Food Impact modifier

Excellent draw down Toughness at low temperature Superior ESCR
Excellent printability

Typical Value*

923 kg/m3 0.25 g/10min 1.0 g/10min 22 g/10min 124 °C

101 °C >5000 Hours

Test Method

ASTM D 792 ASTM D1238 ASTM D1238 ASTM D1238 ISO 11357/03 ISO 306
ASTM D1693-B

Color	White
Packaging Type	sack
Packaging Size	25kg
Melt Flow Index	2.3
Physical State	Solid

Minimum order quantity: 5000 Kg

JF18020 LINEAR LOW DENSITY POLYETHYLENE FILM EXTRUSION GRADE This is a butene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants. This grade does not contain any slip or antiblock, designed for good processing on Blown & Cast Film lines with excellent balance of mechanical & optical properties. ____________________________________________________________________________________
Additives details: JF18020: ● Slip: Nil ● An/block: Nil ● Heat Stabilizer: Yes

Usage/Application	Blown Film
Color	Natural
Packaging Type	FFS Bag
Packaging Size	25 kg
Melt Flow Index	1
Brand	Luban
Storage Instructions	Store in cool and dry place
Physical State	Solid

Minimum order quantity: 5000 Kg

Luban DFDC-7080 Linear Low Density Polyethylene

DFDC-7080 is a butene LLDPE grade offering excellent drawdown and puncture resistance combined with high gloss and clarity. Films made from DFDC-7080 resin have very good tensile and toughness properties.

Additives: • Anti-block: High • Slip: Medium • Thermal Stabilizer

Application - Agricultural Film, bag in box, food packaging films, FFS packaging films, garment bags, liner bags, multi-layer packaging films, cast film, drip irrigation tubes

Usage/Application	Plastic Industry
Color	White
Packaging Type	FFS Bag
Packaging Size	25 kg
Melt Flow Index	1.0
Brand	Loterene
Storage Instructions	Store in cool and dry place
Physical State	Solid

Minimum order quantity: 5000 Kg

Lotrène Q1018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer.
They are designed for blown film applications and can be used in pure form as well as blended with other PE resins, such as LDPE or HDPE and mPE resins for mono extrusion or co-extrusion process to modify film properties. Lotrène® Q1018 Series are suited for many applications in the field of consumer, agricultural, industrial, food or hygiene packaging, for example: collation shrink, liners, FFS bags, heavy duty sacks, refuse, tunnel films, mulching films...

Usage/Application	Plastic Industry
Color	White
Packaging Type	FFS Bag
Packaging Size	25 kg
Melt Flow Index	2.0
Brand	Sabic
Storage Instructions	Store in cool and dry place
Physical State	Solid

Minimum order quantity: 5000 Kg

218NJA is a butene Linear Low Density Polyethylene TNPP free grade suitable for general‐purpose packaging. It is easy to process giving good tensile properties, impact strength and optical properties. 218NJ contains no slip and no antiblock additives.

Usage/Application	Plastic Industry
Color	White
Packaging Type	FFS Bag
Packaging Size	25 kg
Melt Flow Index	1.0
Physical State	Solid

Minimum order quantity: 5000 Kg

ExxonMobil
ExceedTM 1018MK

Performance Polymer 

Exceed 1018MK resin is an ethylene 1-hexene copolymer. Films made from Exceed 1018MK resin have outstanding tensile, impact strength and puncture. These superior strength properties, along with excellent drawability, allow downgauging in bag application. TnPP is not intentionally added to Exceed 1018MK.

Resin Properties

• Africa & Middle East • Europe • North America • AsiaPacific • LatinAmerica

• Exceed 1018MK: Antiblock: 5000 ppm; Slip: 1000 ppm; Processing Aid: Yes; Thermal Stabilizer: Yes

• Agricultural Film
• BaginBox
• BarrierFoodPackaging
• BlownFilm
• BreadBags
• Food packaging
• FormFillAndSealPackaging

• FreezerFilm
• GeneralPackaging
• HeavyDutyBags
• IndustrialPackaging
• LaminationFilm
• Multilayer Packaging Film • OverwrapFilm

Typical Value

• PackagingFilms
• PremiumTrashBags • StandUpPouches
• TrashBags
• TrashCanLiners

• 05/22/2018

Typical Value

(English)

(SI)

g/cm3 g/10 min °C

(SI)

MPa MPa MPa MPa %

% MPa MPa g
g
g
N

J

(SI)

%

Test Based On

ASTM D1505 ASTM D1238

ExxonMobil Method

Test Based On

ASTM D882

ASTM D882

ASTM D882

ASTM D882

ASTM D882

ASTM D882

ASTM D882

ASTM D882

ASTM D1709A

ASTM D1922

ASTM D1922

ExxonMobil Method

ExxonMobil Method

Test Based On

ASTM D2457 ASTM D1003

Density 0.918

g/cm3 0.918 g/10 min 1.0 °F 119

(English) Typical Value

psi 9.4 psi 9.4 psi 50 psi 43 % 500 % 600 psi 190 psi 190 g 460 g 250 g 470 lbf 36

in·lb 1.8

(English) Typical Value

39 %18

Melt Index (190°C/2.16 kg) Peak Melting Temperature

Film Properties

Tensile Strength at Yield MD Tensile Strength at Yield TD Tensile Strength at Break MD Tensile Strength at Break TD Elongation at Break MD Elongation at Break TD
Secant Modulus MD - 1% Secant Secant Modulus TD - 1% Secant Dart Drop Impact

Elmendorf Tear Strength MD Elmendorf Tear Strength TD Puncture Force

Puncture Energy

1.0 247

Typical Value

1400 1400 7900 6200

500

600 27000 28000 460 250 470 8

16

Optical Properties Typical Value

Gloss (45°) 39 Haze 18

Usage/Application	Plastic Industry
Color	White
Packaging Type	FFS bag
Packaging Size	25 kg
Melt Flow Index	2
Brand	Equate
Storage Instructions	Store in cool and dry place
Physical State	Solid

Minimum order quantity: 5000 Kg

EFDC-7050 LLDPE Film Extrusion Resin

DESCRIPTION

EFDC-7050 is a linear low-density polyethylene (LLDPE) resin for tubular blown film extrusion. Films extruded from EFDC-7050 have good toughness and high tensile strength and puncture resistance. The product offers excellent draw down capability for making thinner gauge films. EFDC contains high levels of slip and antiblocking agent. It offers excellent sealing and machining characteristics for high-speed film converting operations.

APPLICATIONS

EFDC-7050 is recommended for the manufacture of thin gauge liner films, garment bags and films for other industrial, food packaging and other general-purpose applications requiring toughness and puncture resistance.

TYPICAL PROPERTIES

Properties
Resin Properties
Melt Index, I2.16
Density
Melting Point
Bulk Density
Blown Film Properties* Gauge
Tensile Strength

Elmendorf Tear

Dart Impact, F50

Puncture Energy

Haze

Gloss, 45°

Units

g/10 min

g/cm3 °C Kg/m3

Microns MD MPa

TD
MPa

MD N/mm TD

g J/mm %
-

Test Method

Typical Value

ASTM D 1238 2.0 ASTM D 1505 0.918 EQUA TE 124 ASTM D 1895 530

25 ASTM D 882 31 23

ASTM D 882 195 220

ASTM D 1922 31 124

ASTM D 1709A 85 EQUA TE 60 ASTM D 1003 14 ASTM D 2457 50

1% Secant Modulus MD TD

* Film properties are typical of blown film extruded at 2:1 blow-up ratio.

Usage/Application	Film
Color	Natural
Packaging Type	FFS bag
Packaging Size	25 kg
Melt Flow Index	2.0
Brand	HMEL
Storage Instructions	Store in cool and dry place
Physical State	Solid
Country of Origin	Made in India

Minimum order quantity: 5000 Kg

F0218L Polysure LLDPE Blown Film

Product Characteristics: Polysure F0218L is a 1-butene comonomer based Linear Low Density Polyethylene, produced by Gas Phase – UNIPOLTM PE technology and primarily suitable for Blown & Cast Film Extrusion Process. This grade does not contain Slip & Anti-block additives. Film produced with F0218L offers excellent optical, superior mechanical, tear resistance & good heat seal properties. Recommended Applications: Liners, Air bubble film, Stretch Wrap, Multilayer film, Lamination, Mulch films for Agriculture Typical Properties: Sr. No. Property Test Method Unit Value Resin Properties: 1 Melt Flow Index (190°C & 2.16 kg) ASTM D1238 g/10 min 2.0 2 Density (23°C) ASTM D1505 g/cc 0.918 Film Properties*: 1 Tensile Strength at Yield (MD/TD) ASTM D882 (500 mm / min) MPa 9 / 9 2 Tensile Strength at Break (MD/TD) MPa 29 / 22 3 Tensile Elongation at Break (MD/TD) % 650 / 760 4 Elmendorf Tear Strength (MD/TD) ASTM D1922 g/micron 5.3 / 15.2 5 Dart Impact Strength ASTM D1709A g/micron 2.7 6 Haze ASTM D1003 % 11 7 Gloss ASTM D2457, 60° GU 95

F0218L to be manufactured complying the requirements specified in IS 10146 on “Specification for Polyethylene for its safe in contact with Foodstuff, Pharmaceutical & Drinking water”. Furthermore, the Additives added in this grade formulation compiles to the “Positive list of constituents for Polypropylene, Polyethylene and their Copolymers for its safe use in contact with Foodstuffs & Pharmaceuticals' as laid down under IS 16738:2018. In general, the additives & constituents used in the grade are in line with requirement laid down under FDA: CFR Title 21,177.1520, Olefin Polymers. 

Usage/Application	Plastic Industry
Color	White
Packaging Type	Sack
Packaging Size	25 kg
Melt Flow Index	50
Physical State	solid

Minimum order quantity: 5000 Kg

SABIC LLDPE M500026 Linear low density polyethylene for masterbatch compounding

SABIC LLDPE M500026 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution.

Application - SABIC LLDPE M500026 resin is recommended for injection moulding masterbatch where a high filler acceptance is required, combined with a good flow.

Processing conditions - Typical moulding conditions for SABIC® LLDPE M500026 are: material temperature 180 - 230 °C (355 - 450 °F). Mechanical properties Test specimen is prepared from compression moulded sheet made according to ASTM D-1928, procedure C.