Deora Enterprises LLP

Minimum order quantity: 5000 Kg

Moplen HP551R

Moplen HP551R is a homopolymer suitable for extrusion applications. This grade is formulated with anti gas fading stabilisation package. Moplen HP551R is used for poduction of continuous filaments (CF), Bulk continuous filaments (BCF) and stape fibres.


Typical applications are carpet, upholstery, ropes etc

Minimum order quantity: 5000 Kg

H030SG Reliance PP Raffia Granules are recommended for Raffia Tapes wed in making woven fabrics for sacking, carpet backing, industrial packaging and geotextile applications.H030SG Reliance PP Raffia Granules combine good processability on a water bath and chill-roll with excellent mechanical properties. Formulated for low water carry-over. 


Applications: 

• Woven fabrics, sacks & monofilaments.

Storage Recommendations: 

• Bags should be stored in dry/ closed conditions at temperatures below 50°C and protected from UV/direct sunlight 

Minimum order quantity: 5000 Kg

Advanced-PP 1101 SC is a polypropylene homopolymer fibre grade characterized by very high flowability, very narrow molecular weight distribution and medium crystallinity providing excellent and consistent process and product behaviour. Advanced-PP 1101 SC is especially suitable for the production fine titer spunbond nonwovens at high speed production lines used for hygiene application. The product comprises an Advanced-PP phenol free stabiliser package providing high gasfading resistance and inherent basic UV-stability.

The Grade Advanced-PP 1101SC and additives incorporated comply with United States FDA Regulation 21CFR 177.1520 Olefin Polymers and European Regulation (EU) 10/2011 (and its amendments 1282/2011 & 1183/2012). Specific information is available upon request.

Properties ( Typical values)

Advanced Petrochemical Company

Data Sheet* Advanced-PP 1101 SC

Description

Application

Non wovens spun bonded.

Minimum order quantity: 5000 Kg

Marlex® HGX-030SP Polypropylene

This polypropylene homopolymer is tailored for applications that require: • Good resistance to gas fading Typical raffia, fiber/yarn applications include: • Woven industrial fabrics and bags • Rope and cordage • Woven carpet backing • Woven geotextile fabrics

Minimum order quantity: 5000 Kg

Luban HP3107K is manufactured using the Spheripol Technology. Luban HP3107K is a homopolymer polypropylene designed for the production of biaxially oriented polypropylene films (BOPP). The product is suitable for metallizable film, both as monolayer and in coextruded structures.

Core layer in BOPP film. Packaging bags for food and non-food, plain and laminated garment bags, plain and pigmented label film, lamination film, plain overwrap film, plain and colored adhesive tapes.

Properties (Typical Values)

operties (Typical Values)

Property

Melt flow rate (230°C/2.16 kg) Density
Tensile modulus (1 mm/min) Tensile stress at yield (50 mm/min) Tensile strain at yield (50 mm/min) Tensile strain at break (50 mm/min) Charpy notched impact strength

Heat Deflection Temperature (0.45 MPa) (+23°C)

Vicat Softening Temperature

Units

g/10 min g /cm3 MPa MPa %
% kJ/m2 °C
°C

Test method

ISO 1133 ISO 1183 ISO 527-2 ISO 527-2 ISO 527-2 ISO 527-2 ISO 179/1eA ISO 75-2 ISO 306

Value

3.0 0.90 1450 34 9 > 50 4 85 154

Minimum order quantity: 5000 Kg

M12RR Polypropylene Homopolymer Injection Molding

Polysure M12RR is Polypropylene Homopolymer, produced by latest Novolen Technology & Primarily suitable for General Purpose Injection Moulding, Furniture & Housewares applications. M12RR combines exceptional processability with low Cycle Time & excellent product aesthetics.

M12RR is recommended for General Purpose Injection Moulding, Closures, Furniture, Housewares &

Compounding.

Typical Properties:

1. 1  Melt Flow Index ( 230oC & 2.16 kg)

2. 2  Tensile Strength @ Yield (50mm / min)

3. 3  Tensile Elongation @ Yield (50mm / min)

4. 4  Flexural Modulus

5. 5  Notch Izod Impact Strength ( 23oC)

6. 6  Vicat Softening Point (10N)

7. 7  Heat Deflection Temperature (0.455 MPa)

ASTM D1238 ASTM D638 ASTM D638 ASTM D790 ASTM D256 ASTM D1525 ASTM D648

g/10 min 12 MPa 34

% 8 MPa 1550 J/m 30

oC 154 oC 95

Minimum order quantity: 5000 Kg

Polypropylene Homo polymer HF010 TQPP Film

MANGPOL HF010 is a Polypropylene Homo polymer produced by latest solvent free gas phase polymerization using Novolen Technology. This grade is primarily suitable for tubular water quench film applications. HF010 combines exceptional processability with superior Slip, Anti Blocking Properties, excellent Clarity and Gloss.

This grade is not to be used for manufacturing of any direct / indirect food contact substance / applications.

Recommended Applications:

• Textile over-wraps, garment bags.

• General Purpose packaging.

• Typical Properties

1. Melt Flow Index (I2.16 @230°C)

2. Tensile Strength at Yield

3. Tensile Elongation at Yield

4. Flexural Modulus

5. Izod Impact Strength

6. Vicat Softening Point (10N)

7. Heat Deflection Temperature (0.455MPa)

ASTM D 1238

ASTM D 638

(Type 1)

ASTM D 790

ASTM D 256

ASTM D 1525

g / 10 min 10.5 MPa 34 % 9 MPa 1500 J /m 30 °C 154 °C 95

Minimum order quantity: 5000 Kg

H100EY HOMOPOLYMER FOR TQ (TUBULAR WATER QUENCH) FILM Repol H100EY is recommended for use in TQ (Tubular Water Quench) Film. It contains slip and antiblock additives. Repol H100EY is an ideal material to use in textile overwraps, packaging of readymade garments, snack food, grocery and general-purpose packaging. 

Typical Characteristics Property Test Method Unit Typical Value* Melt Flow Rate (230oC/2.16 kg) ASTM D1238 gm/10 min 11.0 Density ASTM D792 g/ cc. 0.90 FILM PROPERTIES (TQPP FILM) Tensile Strength at Yield (MD / TD) ASTM D882 MPa 22 / 19 Tensile Strength at Break (MD / TD) ASTM D882 MPa 32 / 30 Elongation at Break (MD / TD) ASTM D882 % 580 / 750 Haze – 20 µ / 40 µ ASTM D1003 % 3.0 / 7.0 Gloss @ 20 o / 60 o ASTM D2457 GU 70 / 115 Coefficient of friction (St / Kn) ASTM D1894 --- 0.25 / 0.20 CTPOD Reliance H100EY

Minimum order quantity: 5000 Kg

H110MA HOMOPOLYMER FOR INJECTION MOLDED PRODUCTS

Repol H110MA is recommended for Injection Molding processes. Repol H110MA is an ideal choice for molding rigid containers, thermoware and houseware. It is also suitable as a compounding base and blending material in furniture compound. Repol H110MA contains antistatic agent that reduces static charge build-up in products. Typical Characteristics Property Test Method Unit Typical Value* Melt Flow Rate (230oC/2.16 kg) ASTM D1238 gm/10 min 11 Density ASTM D792 g/cc. 0.90 Tensile Strength at Yield (50 mm/min.) ASTM D638 MPa 36 Elongation at Yield (50 mm/min.) ASTM D638 % 10 Flexural Modulus (1% Secant) ASTM D790A MPa 1650 Notched Izod Impact Strength (23 OC.) ASTM D256 J/m 27 Heat Deflection Temperature (455 KPa) ASTM D648 OC 104 Hardness – Shore D ASTM D2240 --- 70

Minimum order quantity: 5000 Kg

C080MA

IMPACT COPOLYMER

FOR INJECTION MOULED PRODUCTS

Repol C080MA is recommended for use in Injection Molding process where high impact strength is required. It is an ideal material for use in making furniture and industrial products. Repol C080MA contains antistatic agent that reduces static charge build up in products.

Typical Characteristics

Melt Flow Rate (230oC/2.16 kg)
Density
Tensile Strength at Yield (50 mm/min.) Elongation at Yield (50 mm/min.) Flexural Modulus (1% Secant)
Notched Izod Impact Strength (23 OC.) Heat Deflection Temperature (455 KPa) Hardness – Shore D

ASTM D1238 ASTM D792 ASTM D638 ASTM D638 ASTM D790A ASTM D256 ASTM D648 ASTM D2240

gm/10 min 9 g/cc. 0.90 MPa 23

% 7 MPa 1000

J/m 150 OC 95 --- 68

Minimum order quantity: 5000 Kg

AVAILABILITY

Qurain'" Polypropylene is available in polyethylene bags with a net weight of 25kg each in a wrapped palletized form. It can also be provided in IBC, intermediate bulk containers to users upon request.

SAFETY

Polypropylene is practically non-toxic and under normal conditions of use it is non- hazardous. However, contact with product fines and heated vapors should be avoided. Adequate ventilation must be employed and exhaust hoods should be installed over processing machines. Material safety data sheets containing more detailed information are available from PIC. We urge you to read our product safety information and enforce good housekeeping in your plant.

Minimum order quantity: 5000 Kg

Luban HP2106N

Polypropylene Homopolymer

Description

scription

Luban HP2106N is manufactured using the Spheripol Technology. Luban HP2106N is a homopolymer polypropylene used for general purpose injection molding applications. It exhibits good flow and stiffness. Luban HP2106N is suitable for food contact.

Application

ion

General purpose injection molding, closures, furniture, houseware.

Properties (Typical Values)

operties (Typical Values)

Property

Melt flow rate (230°C/2.16 kg) Density
Tensile modulus (1 mm/min) Tensile stress at yield (50 mm/min) Tensile strain at yield (50 mm/min) Tensile strain at break (50 mm/min) Charpy notched impact strength

Heat Deflection Temperature (0.45 (+23°C)

Vicat Softening Temperature MPa)

Units

g/10 min g /cm3 MPa MPa %
% kJ/m2 °C
°C

Test method

ISO 1133 ISO 1183 ISO 527-2 ISO 527-2 ISO 527-2 ISO 527-2 ISO 179/1eA ISO 75-2 ISO 306

Value

12 0.90 1550 34 9 > 50 4 85 153

Minimum order quantity: 5000 Kg

R03RR Polypropylene Homopolymer
Woven Sacks & Monofilaments

Product Characteristics: Polysure R03RR is Polypropylene Homopolymer, produced by Latest Novolen Technology & Primarily suitable for tape extrusion process applications.
R03RR combines extremely low water carry-over with Exceptional processability, Good balance of tenacity & elongation for the production of tapes. Recommended Applications: R03RR is recommended for Tape yarns, Monofilaments, Ropes, Leno bags, Strapping & Thermoforming application.

Typical Properties: Sr. No. Properties Test Method Units Values* 1 Melt Flow Index ( 230oC & 2.16 kg) ASTM D1238 g/10 min 3.4 2 Tensile Strength @ Yield (50mm / min) ASTM D638 MPa 34 3 Tensile Elongation @ Yield (50mm / min) ASTM D638 % 9 4 Flexural Modulus ASTM D790 MPa 1500 5 Notch Izod Impact Strength ( 23oC) ASTM D256 J/m 35 6 Vicat Softening Point (10N) ASTM D1525 oC 154 7 Heat Deflection Temperature (0.455 MPa) ASTM D648 oC 95

Minimum order quantity: 5000 Kg

B220MN IMPACT COPOLYMER FOR INJECTION MOLDED PRODUCTS Repol B220MN is recommended for use in Injection Molding processes where high flow and medium impact strength are required. It is an ideal material to use in rigid packaging, automotive components, housewares and appliances parts. Repol B220MN contains nucleating agent. Typical Characteristics Property Test Method Unit Typical Value* Melt Flow Rate (230oC/2.16 kg) ASTM D1238 gm/10 min 22 Density ASTM D792 g/cc. 0.90 Tensile Strength at Yield (50 mm/min.) ASTM D638 MPa 25 Elongation at Yield (50 mm/min.) ASTM D638 % 8 Flexural Modulus (1% Secant) ASTM D790A MPa 1200 Notched Izod Impact Strength (23 OC.) ASTM D256 J/m 80 Heat Deflection Temperature (455 KPa) ASTM D648 OC 105 Hardness – Shore D ASTM D2240 --- 68

Minimum order quantity: 5000 Kg

B120MA

IMPACT COPOLYMER

FOR INJECTION MOULED PRODUCTS

Repol B120MA is recommended for use in Injection Molding processes where medium impact strength is required. It is an ideal material to use in housewares, thermos-wares, sanitary wares, furniture, industrial and automotive components. Repol B120MA contains antistatic agent that reduces static charge build-up in products.

Melt Flow Rate (230oC/2.16 kg)
Density
Tensile Strength at Yield (50 mm/min.) Elongation at Yield (50 mm/min.) Flexural Modulus (1% Secant)
Notched Izod Impact Strength (23 OC.) Heat Deflection Temperature (455 KPa) Hardness – Shore D

ASTM D1238 ASTM D792 ASTM D638 ASTM D638 ASTM D790A ASTM D256 ASTM D648 ASTM D2240

gm/10 min 12 g/cc. 0.90 MPa 24

% 10 MPa 1000

J/m 85 OC 95 --- 68